Top Selling Electronic Cigarettes

SV Mi-Pod Starter Kit is a stylish pod system that brings one of the most visually appealing and beautiful chassis designs in the market, packing in an ample 2ml replacement pod and an all in one single button, draw operated system.

Shifting from the usual vape pen style that has grown in popularity, the Mi Pod has a boxy design that is still excellent for travel and portability. The paneling of the Mi Pod is available in many patterns and designs, with each design line-up offering a unique style. These styles vary from the futuristic Digital Line, and the PLUR Line seen in music festivals all over the country! Packing in a 950 mAh rechargeable battery alongside an ample 2ml replaceable pod system that can easily be filled, the Mi-Pod provides one of the best size to range ratios in the market, and is light enough to be carried via the included braided lanyard. The Mi-Pod features a three color LED indicator providing instant feedback to the battery state; Blue being 3.7 to 4.2V, Purple being 3.4 to 3.7V, and Red being lower than 3.4V. The Mi-Pod is operated with an on and on switch and just drawing straight from the pod. With what is arguably one of the most beautiful designs available in the ultra portable market, SV's Mi-Pod is slated to be one of the marquee all in one systems in this market segment, combining great battery life, easily exchangeable pod system, and a quality build.

Features:

• All In One System
  • Draw Activated
  • Single Button Operation
  • Integrated 950 mAh Rechargeable Battery
  • • Micro USB Charged
• Direct Voltage Output
  • Output Based on Resistance and Battery State
  • On and Off Capable
  • 0.5 to 3.5 ohm Atomizer Resistance
• LED Battery Life Indicator Ring
  • Blue - 3.7 to 4.2V
    • Full Battery Life
  • Purple - 3.4 to 3.7V
    • 50% Battery Life
  • Red - 3.4V
    • Low Battery Life
• Replaceable Pod System
  • 2ml Tank Capacity
  • Vertical Viewing Window
• Stylish Chassis
  • Brilliant and Unique Patterning
  • Lanyard Attachment Point
• Pod Acts as Drip Tip
• Stealth Mode/10 Second Cut Off

Package Contents

• One SV Mi Pod
  • Two Refillable Pods
• One Braided Lanyard
• Micro USB Cable
• User Manual

Relx Pod System Starter Kit is a disposable pod device for a mouth to lung vapers. With pre-filled 2ml e-liquid, the Relx Kit brings an easy vape for portability and ease of use. The Relx Kit comes with a fully 350mAh battery that is guaranteed not to lose charge until e-liquid is fully enjoyed. Just enjoy the Relx kit with delicious flavors!

Features

1. Unique Cigar Designed
2. Stronger Power--Built-In 350mah Battery
3. smooth Mouthpiece
4. With 2ml E-Juice, Not fillable
5. Intelligent Battery Life Indicator
6. Multiple Protections

Relx Kit comes with

1× Relx Device
2× Disposable Pods
1× User Manual

Smoant Pasito Rebuildable Pod Kit is a revolutionary pod system starter kit with three different coils (DTL-Mesh 0.6ohm/MTL-Ni80 1.4ohm/RBA Coil for single coil building) and 5-level adjustable voltages (10W/13W/16W/20W/25W) with the convenient VV button to satisfy all your vaping needs and bring optimal flavor. It also adopts the innovative CPR technology with colorful and durable stunning finish without finger print.

Moreover, the Pasito kit consists of 1100mAh large battery and 3ml refillable pod with a unique adjustable top airflow system to provide smooth airflow and all day vaping. Plus the ant constant-output chip, intelligent LED light, convenient magnet connection and faster Type-C charging, the Smoant Pasito is definitely a wonderful daily vaping device. Get one and have a try to bring your vaping to a new level.

Parameters

Szie: 38 x 18 x 102mm
Battery Capacity: Built-in 1100mAh
Voltage: 3.2-4.2V
5-level VV: 10W/13W/16W/20W/25W
Battery Material: Space Aluminum
Pod Material: Food-grade PCTG
Pod Capacity: 3ml
Coil Resistance: DTL-Mesh 0.6ohm(20-25W)/MTL-Ni80 1.4ohm(10-13W)/RBA Coil(Single coil, suitable for ordinary coil diameter 1.0mm or less, sold separately)
Charge: Type-C 5V/1A
Conversion Rate: 95%

Features:

Multi-functional pod system starter kit
DL/MTL/RBA coils to satisfy all your vaping needs
Adjustable top airflow channel & top filling
Innovative 5-level adjustable voltages with VV button
Ant constant-output chip for superb flavor
Innovative CPR technology with colorful and durable stunning finish
Intelligent LED light
Magnet connection for easy installation
Faster Type-C charging
Colorful resin drip tip

It comes with

• 1 x Smoant Pasito MOD
• 1 x Smoant Pasito Cartridge
• 1 x DTL-Mesh 0.6ohm
• 1 x MTL-Ni80 1.4ohm
• 1 x Type-C Charge Cable
• 1 x User Manual
• 1 x Warranty Card

The Suorin Edge Replacement Pods are made specifically for the Suorin Edge Pod system. These pods have a 1.5ml capacity and a resistance rating of 1.4ohm. Each replacement pod is side filled with a silicone seal.

Coil Specifications:

• Fillable Pod System
  • 1.5ml Capacity
  • 1.4ohm Coil Resistance
  • Replaceable
  • Magnetic

Snowwolf Wocket Pod System Kit is a high-end and robust internals AIO Pod kit, the Wocket pushes the boundaries in advancements in technology for an exquisitely unique design. Utilizing the pod-mod design for lightweight and portability without compromising performance. With a 1150mAh battery capacity, the Wocket extends the usage for your all-day-long vaping needs. Different from conventional pod devices on the market, the Wocket comes equipped with a 0.69 inch OLED display screen. Decorative panels of colorful celluloid and high-grade resin showcase the unique and artistic aspects of the Wocket.

Mod Specifications:

Size: 93.6mm x 40.5mm x 15.4mm

Material: Zinc Alloy

Display: 0.69" OLED

Wattage Range: 5-25W

Input Voltage: 3.4V-4.2V

Battery Support: (internal) 1150mAh

Resistance Range: 0.4Ω-3.0Ω

Charging Support (Micro USB): DC 5V/1A 60-80 minutes

0.015s INSTA-FIRE - With an astonishing Insta-Fire System, the Wocket supports a fire rate of 0.015 seconds, giving you the most sensational taste for every draw.

LARGE BATTERY CAPACITY - With an incredibly large internal battery capacity of 1150mAh, the Wocket extends the usage for your all-day-long vaping needs.

0.69 INCH OLED VISUAL DISPLAY SCREEN - Located on the lateral side, the display screen indicates information such as puff counter, second counter, battery life, draw time, and current wattage. Wattage is adjustable by pressing the toggle button. The wattage loops from lowest to highest setting and the change will be shown on the screen. Battery charging animation, along with power, is displayed, giving you batter control of the device.

SNOWWOLF LOGO ON THE BIG POWER BUTTON - Wocket has an ergonomically designed power button and added the SnowWolf logo right on top!

Wocket Pod (X-Grid Coil pre-installed) Specifications: 

POD NOT INCLUDED - MUST BE PURCHASED SEPARATELY

Size: 40.5mm x 15mm x 39.1mm

Capacity: 3mL

Coil Material: Corrosion Sheet - Iron Chromium Aluminum A1

Coil Resistance: 0.7Ω

Drip Tip Material: PCTG (Food Grade)

Vaping Style: Supports MTL / DTL

Refilling Style: Top Refilling

Use with Nicotine Salt E-Liquids: YES

ADVANCED COIL PROCESS - With the advancements in the coil process, the Wocket aims to provide a better vaping experience by expanding the lifespan of each coil which providing the perfect flavor with every draw.

DUAL ADJUSTABLE AIRFLOW - The airflow can be adjusted by twisting wither the ring located near the drip tip or attached to the coil.

DOUBLE AIRFLOW CHANNELS - The large double airflow channel allows an influx of air to provide additional pod ventilation while cooling the system.

• less carbon deposit
• large air input
• longer lifespan
• better flavor

FOOD GRADE MATERIAL - Developed by Eastman, the Wocket uses an FDA certified food-grade material (PCTG) to make each pod. This eliminates potential pollutants that are found in other pods.

FILLING STYLE:

1. Pull out the filling cap.
2. Add the e-liquid through the slot.
3. Press the filling cap firmly back into place.

REPLACING THE COIL:

1. Pull the pod out of the device.
2. Pull out the old coil.
3. Replace with new coil by pressing in.

MULTIPLE PROTECTIONS - Short circuit protection, overheat protection, and high/low voltage protection.

Box Contents:

1 x Wocket Mod

1 x USB Cable

1 x Warranty Card

1 x PASS Card

1 x User Manual

Uwell Nunchaku RDA 80W Starter Kit is a phenomenal vape pen,combining elements of an extensive temperature control suite, threaded bottom battery cap, and is paired with the nifty Uwell Nunchaku RDA. The Nunchaku RDA 80W Kit introduces a temperature control suite for advanced vapers to dial in settings that match their preferred vaping style. This temperature control also includes nickel and stainless steel wires, but can be freely operated in the Bypass or Power Modes for novices or those that do not like to use temperature control. Furthermore, the Nunchaku RDA Starter Kit is crafted in a pen-style, relegating the threaded bottom cap to contain a single high-power 18650 battery(sold separately). The Nunchaku RDA Starter Kit is paired with the Nunchaku RDA featuring an expansive two post build deck, sans screws, and is instead top-fastened by the posts as they are threaded.

Uwell Nunchaku 80W Device Features:

• Dimensions - 129.1mm by 27.4mm (w/ Atomizers)
• Single High-Amp 18650 Battery - Not Included
• Wattage Output Range: 5-80W
• Voltage Output Range: 0.7V-7.0V
• Resistance Range - TC: 0.1-1.0ohm
• Resistance Range - VW: 0.1-3.0ohm
• Resistance Range - Bypass: 0.1-5.0ohm
• Temperature Range: 200°-600°F / 100°-300°C
• Ni200 and Stainless Steel Compatibility
• Power Mode
• SS Temp Mode
• Ni Temp Mode
• Bypass Mode
• Stainless Steel and POM Chassis Construction
• Oversized Intuitive Firing Button
• Two Adjustment Buttons
• Small Display Screen
• Threaded Bottom Battery Screw
• MicroUSB
• Spring Loaded 510 Connection
• Available in Navy Blue, White, Purplish Red, Mint Green, Olive Green

Uwell Nunchaku RDA Features:

• 24mm Diameter
• Superior Stainless Steel Construction
• Spacious Two Post Build Deck
• Top Secured via Threaded Posts
• Single or Dual Coil Configuration
• Uwell Pro-FOCS Flavor Technology
• Dual Slotted Airflow Top Cap - Single or Dual Coil Options Available
• 810 Widebore Delrin Drip Tip
• Squonk Ready Bottom Feeding 510 Pin
• Spring Loaded 510 Contact Pin
• High-Temp Resistance Coating
• Available in Navy Blue, White, Purplish Red, Mint Green, Olive Green

Includes: 

• 1 Uwell Nunchaku Device
• 1 Uwell Nunchaku RDA
• 1 Extra Female Screw
• 1 Squonk Pin
• 1 User Manual
• 1 Insulator 
• 1 Pack of O-Rings
• 1 MicroUSB Cable
• 1 0.3ohm NiChrome Coils 
• 1 Wrench
• 1 Japanese Organic Cotton

Innokin introduces the Proton 235W TC Starter Kit, featuring an upgraded 235W chipset with a full temperature control suite, a large side firing panel, and a unique joystick selector. The Proton is capable of 6 to 235W of output, with a 0.05 to 3.5 Ohm atomizer resistance. The Proton features a 1.45" full color screen allows you to choose from six different colors to personalize your device; blue, red, green, pink, purple, and white. Located under the colored TFT screen is an ergonomic joystick control. Wattage output of the device can be controlled with a simple up and down motion on the joystick and locking the device is as simple as three clicks. Additional control combos can be viewed on the quick reference booklet provided with the device. Dual high amperage 18650 batteries (sold separately) are housed in a slide-to-open battery access door located at the bottom of the device, along with a micro-USB port also allows you to charge the dual batteries for up to 2 amps. This kit features the Scion II Sub-Ohm Tank with Innokin's new Plexus Coil Technology, 0.15 mesh coil for use from 60 to 100W that provide with greater longevity, flavor, and stronger throat hit. This Sub-Ohm Tank comes pre-installed with 0.36 Ohm quad vertical coils for use from 80 to 150W that have excellent flavor, warmth, and vapor production. Both coils have four wicking ports that allow for quick wicking that prevents dry hits during extensive use. The Scion 2 Sub-Ohm has an 810 bore drip tip to allow for greater air flow and a convenient easy push-top fill slot for easy refilling on-the-go. The new Proton starter kit is for the using looking for the durability and flavor of mesh coils, along with all the features that compete with today's best mods. 

Proton 235W TC Box Mod Features:

• 6 to 235W Wattage Output
  • 0.05 to 3.5 ohm Atomizer Resistance Range
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel Support
  • Curve Support
  • TCR Support
  • Bypass Support
  • 300 to 600 Degrees Fahrenheit Output Range
• 1.45" TFT Screen Display
  • Output Wattage or Temperature
  • Output Timer
  • Output Voltage
  • Mode and Heating Element
  • Individual Battery Life Indicator
  • Atomizer Resistance
  • Lock Indicator
  • Puff Counter
• Six Menu RGB Customization
  • Blue
  • Red
  • Green
  • Pink
  • Purple
  • White
• Dual Control Interface
  • Oversized Grip Style Fire Button
  • Analog Control Adjustment Interface
• Slide to Open Bottom Latch Battery Access Door
  
  •  
  • Accepts Two High Amperage 18650 Batteries
    
    • Sold Separately
  • Micro USB Charging
    • 5V/2A
• Stainless Steel 510 Threading
• 24K Gold Plated Spring Loaded 510 Connection

Proton Box Mod Product Dimensions:

• 85mm by 44.6mm by 29.6mm

Scion 2 Sub-Ohm Tank Product Features:

• 24mm Diameter
  • 25mm Widest Diameter
• Slip Top Fill System
  
  • 3.5ml Capacity
  • Threaded Drip Tip
• Scion Coil System
  • 0.15 ohm
    • 60 to 100W
    • Single Kanthal Mesh Coil
    • Quad Wicking Ports
  • 0.36 ohm
    • 80 to 150W
    • Quad Vertical Coil
    • Quad Wicking Ports
  • Organic Cotton
• Dual Adjustable Airflow
  • 9mm by 2mm Each
  • Fully Closable
• 10mm Bore 810 Delrin Drip Tip
• Stainless Steel and Glass Construction

Product Includes:

• One Innokin Proton 235W TC Mod
• One Innokin Scion II Tank
• One Plexus Coil 0.36 Ohm
  • Pre-Installed
• One Plexus Coil 0.15 Ohm
• One Spare 5ml Glass Tube
• One Extra Drip Tip
• Extra O-Rings Bag
• One USB Charging Cable
• One Innokin Glass Band
• User Guide

The Coilary LUX 200W Box Mod is an exemplary vape system from CoilART, combining functional features with beautiful aesthetic design elements and high performance chipset to pair with a flavorful mesh tank that stands tall amongst the competition. Crafted from durable zinc alloy, the Lux Kit chassis is durable enough to withstand light to moderate drops and falls. The magnetized side panels are formed from reinforced UV-printed glass panels to add a luxurious design element and can be removed on either side. In addition, the CoilART Lux Starter Kit comes ready to match wire resistances in temperature control mode or can be used as a simpler Sub Ohm vape by setting the desired wattage. Unlocking a range of 5-200W, the CoilART Lux calls upon the proprietary EAGLE Chipset within to reach resistances as low as 0.05ohms. Featuring spring loaded self-adjusting battery contacts and exquisite visually striking glass inlays, this starter kit embodies the balance between luxury and performance.

CoilART LUX 200W Box Mod Features:

• Designed by Italian Fashion Designer Aligheri Petraca
• Dimensions - 89mm by 53mm by 25mm
• EAGLE Chipset
• Dual High-Amp 18650 Batteries - Not Included
• Wattage Output Range: 5-200W
• Resistance Range: 0.05-3.0ohm
• Temperature Range: 95°-315°C / 200°-600°F
• VW Mode
• TC Mode
• Nickel, Titanium, and Stainless Steel Compatibility
• Zinc-Alloy Chassis Construction
• Magnetic Battery Door
• Oversized Firing Button
• Two Adjustment Buttons
• Firing Speed: 0.005s
• Customizable User Interface
• Reinforced UV-Printed Glass Panels
• 10 Proprietary Protections
• Spring-Loaded 510 Connection
• Available in Black, White, Blue, Green, and Red

CoilART LUX Mesh Sub-Ohm Tank Features:

• 24mm Diameter
• Straight Glass Tube
• Bubble Glass Tube
• Pyrex Glass Reinforcement
• Superior Stainless Steel Chassis Construction
• Quarter Turn Top Fill System - Silicone Cover
• CoilART Lux Mesh Coil Family
• 0.15ohm M1 Mesh Coil - rated for 60-80W
• 0.15ohm M4 Mesh Coil - rated for 100-120W
• Dual Slotted Bottom Airflow Control Ring
• 810 Widebore Resin Drip Tip
• Gold-Plated 510 Connection
• Available in Black, White, Blue, Green, and Red

Includes:

• 1 LUX 200W Box Mod
• 1 LUX Sub-Ohm Tank
• 1 Spare Glass Tube
• 1 0.15ohm M1 Mesh Coil - rated for 60-80W
• 1 0.15ohm M4 Mesh Coil - rated for 100-120W
• 1 MicroUSB Cable

Tesla Biturbo Starter Kit

Tesla Biturbo Mech Dual RDA Starter Kit is a powerful device that has the ability to fire two RDAs at the same time for greater vapor productions. Users can add two flavors e-liquid into RDAs and enjoy a complex and unique taste. The device is equipped with buttons for channel selection at the bottom, which allows users to know the usage of this device better. All of these are designed to provide you with an unbeatable taste and quality. Innovation leads to changing life.

Tesla Biturbo Mech Mod Operations:

1. Power On: Insert two 18650 high-drain batteries i nto the body of the device. The blue LED A and B will falsh 5 times to indicate the dual channels are started, and device will enter the mode of stand-by.(We recommend using high-drain 18650 batteries with rated discharge current>30A. Please be careful about the positive and negative signs inside the battery compartments.)
2. Power Off: Press the fire button for 5 times consecutively when the device is powerd on, and corresponding LED will flash for 3 times to indicate that the device is powered off.
3. Vaping: Press the fire button simultaneously as you vape and release the fire button when vaping is not required.
4. Working Mode Switch: Users can enjoy the switching among four working modes: opened channel A adn B / Opened Channel A / Opened Channel B / Closed channel A adn B. Press channel selection button A/B to open or close the channel A/B.

5. Charging: Remove the 18650 batteries from the device and recharge the batteries buy using an proper recharging device.

Tesla Biturbo Mech RDA Operations:

1. Steps for Installation: Before starting, make sure your hands are clean. Take RDA apart, install the pre-wrapped wire, and position and cut the ends of the wire off. Insert the cotton, and place it in the middle. Cut the cotton at an angle and make sure it's not too short or too long. Wet the coil with e-liquid and adjust the cotton.
2. Adjusting the Airflow: Adjust airflow through rotating the stainless tube, where a total of two airflow holes are located.

Tesla Biturbo Mech Starter Kit Protections
1. Over Puffing Protection: The device will deactivate after continuous puffing of more than 10 seconds. Then corresponding LED will flash for 8 times, and the device will enter the stand-by mode.
2. Reverse Connection Protection: If batteries are inserted incorrectly, the device will fail to power on and will prevent any damage to the chipset.
3. Low Voltage Alert: When the voltage drops below 7.5V, corresponding LED will flash for 15 times and the device will power off.
4. Atomizer Short-circuit Protection: When an atomizer short circuit occurs, corresponding LED will flash for 5 times rapidly and the device will enter the stand-by mode.

Tesla Biturbo Features & Spec:

1 or 2 RDAs Arbitrary Switch
Channel Selection Button
Dual 18650 Cells Setup
Connector Bridge For RDAs
Great Vapor Productions
Wide Bore Drip Tip
Airflow Control System
Enjoy Two Flavors Simultaneously
Biturbo Mech Mod
Dimension: 52*26*107mm(starter kit) / 52*26*88mm(Mod)
Material:Zinc Alloy(Die Cast)
Cell Type: 2 Hi-drain 18650 cell(Discharging current should be above 30A)
Thread Type: 510 thread
Min resistance: 0.1Ohm(Single RDA)/0.2Ohm(Dual RDAs)
Input Voltage Range: 6.0V~8.4V
Standby Current: < 5uA
LED Indicator: Blue
Protections: Over puffing protection/ Reverse connection protection/ Atomizer short-circuit protection/ Low voltage alert.
Biturbo Mech RDA
Diameter: 25mm
Height: 30mm
Adjustable Aiflow: Yes

PACKAGE CONTENTS:

1 * Biturbo Mech Mod
2 * Biturbo Mech RDAs
1 * Connector
1 * Drip Tip
4 * Clapton Wire
6 * Silicone Rings
1 * Screwdriver
8 * Screws
2 * Organic Cotton
1 * USER Manual

PRODUCT INCLUDES

• One Vaporesso LUXE S 220W TC Box Mod
• One Vaporesso SKRR-S Sub-Ohm Tank
• One 0.15 ohm QF Strip Coil
  • Pre-installed
• One 0.2 ohm QF Meshed Coil
• One Replacement Glass Tank Section (5ml)
• One Silicone Glass Tank Section Case
• One O-Ring
• One User Manual and User Guide
• One Warranty Card

Aero Mesh tank features:

• 4ml juice capacity
• Extra 5ml bulb glass tube attached
• Top filling design
• 510 threading connection
• 25mm overall diameter

Aegis Legend mod features:

The Vandy Vape Simple EX Squonk Kit follows the tremendous success of the Pulse BF 80W, featuring a compact regulated voltage squonk device and RDA with integrated battery design and user-friendly functionalities for a great entry-level squonk set-up. Featuring one of the smallest squonk BF mod to date, the Simple EX Squonk Kit features a lightweight and compact box mod with a 4mL squeeze bottle cutout and a smart chipset. Powered by the built-in battery, the Simple EX Squonk Box Mod features a OLED screen that clearly displays voltage settings and battery life. Operated by a tactile firing button, the Simple EX Kit implements a variable range of 3.3 to 4.5 Volts, with adjustments made in increments of 0.3V. The included Simple EX RDA measures 19mm in diameter, presenting a top-secured two-post for single coil configuration and a restricted single side airslot design. Perfect for mouth-to-lung vapers or beginners looking into squonk systems, the Vandy Vape Simple EX Squonk Kit is a phenomenal offering.

Vandy Vape Simple EX Squonk Box Mod Features:

• Dimensions - 58.5mm by 41mm by 23.6mm
• Intergrated Battery Design
• Bottom-Feeding Squonk Design - 4mL Squeeze Bottle
• Vandy Vape's Advanced Chipset
• Variable Voltage Range: 3.3-4.5V
• Voltage Changes in Increments of 0.3V
• Lightweight Nylon & ABS Construction
• Intuitive OLED Screen - Battery & Voltage Display
• LED Battery Light Indicator
• Tactile Firing Button
• Dual Adjustment Buttons
• Overtime Protection
• No Atomizer Alert
• Low Power Protection
• Short Circuit Protection
• Over Temperature Protection
• Squonk-Ready 510 Connection 
• Available in Pink, Blue, Green, ULTEM

Vandy Vape Simple EX RDA Features:

• 21mm Diameter
• Clear Acrylic Top Cap Construction
• Optional Delrin Top Cap 
• Two-Post, Single Terminal Design
• Large Terminal Shelf Opening
• Top-Secured via Flathead Slotted Screws
• Restricted Airflow Design
• Adjustable Single Side Airslot - Multi-Sized Airflow Size
• Gold-Plated Squonk BF 510 Pin
• Gold-Plated 510 Connection

Includes:

• 1 Simple EX Squonk Box Mod
• 1 Simple EX RDA
• 2 1.24ohm Superfine MTL Fused Clapton Coils
• 1 Screwdriver
• 1 Allen Key
• 1 Regular 510 Pin
• 1 Spare Parts Bag
• 1 MicroUSB Cable
• 1 Warranty Card
• 1 User Manual

The Feedlink is a single 18650 battery bypass firing mod with all the quality and safety features you have come to expect from Aspire. It is almost pistol grip feel makes it very ergonomic in the hand and easy to operate the squonk bottle and fire button with just one hand, an absolute joy to hold and use. In addition to the Feedlink mod there is the newly designed bottom feeding Revvo boost Tank. Aspire had already broken the mold for a tank with its new, flat Radial coil, and now it is even easier to fill with a bottom feeding squonk pin! The tank itself comes in a TPD compliant 2ml version, who needs any more capacity when just a squeeze of the squonk bottle will top up your tank, you do not even have to put it down.

Feedlink Mod Specifications:

• Height: 124mm
• Width: 48mm
• Thickness: 30mm
• Basic Fire Button
• Ergonomic "Pistol Grip" Chassis
• Bottom-Filled Tank- and Atomizer-Ready
• Threaded Battery Cover
• 7ml Silicon Squonk Bottle
• Output Voltage of 3.0V to 4.2V
• Bypass Output Mode
• Resistance Range of 0.1ohm to 3.5ohm
• Powered by Single 18650 Battery (Sold Separately)
• Maximum Firing Time of 10 Seconds
• Automatic Cutoff after 10 Seconds
• Over-Heating Protection
• Over-Discharge Protection
• Reverse Battery Protection
• Short-Circuit Protection

Revvo Tank Specifications:

• Diameter: 24mm
• Length: 41mm
• Wattage: 70W - 80W
• Adjustable Airflow Ring
• Up to 2ml E-Liquid Capacity
• Advanced ARC technology
• Coil Resistance: 0.1ohm - 0.14ohm
• Glass Securing Ring
• Wide Bore Delrin Drip Tip/Cap

Includes:

• (1) Aspire Feedlink Box Mod
• (1) Aspire Revvo Boost Tank
• (2) Aspire Radial Coils
• (1) Replacement Glass Tube
• (1) Bag of O-Rings
• (1) Instruction Manual 
• (1) Warranty Card

Here is the World's Smallest dual battery squonk kit  which co-designed by Tony B and Vandy Vape CEO Stefen Z,the Pulse Dual Squonk Mod has maximum power output of 220 watts with Dual 18650 batteries and comes with the the excellent quality and highest stability Vandy Chip,also the Vandy Vape Pulse Dual Mod kit comes with the newest Pulse V2 RDA,there different airflow rings supporting Dual or Single Coil builds.The Pulse V2 RDA adopts an innovative floating deck, which supports top squonk feeding and bottom juice return design. Easy to build and avoid leakge.

Main Features:

1.Smallest Dual Battery Squonk Mod with 75.3mm height &52.99mm width
2.The battery cover and juice bottle are independent. 
3.The Mod and PULSE V2 RDA match perfectly.
4.Ergonomically Designed
5.Powered by an Upgraded Vandy Chip with max power of 220w
6. Convenient battery installation
7.Equipped with 7ml juice bottle

Authentic Augvape Druga Squonker Kit

VapeOnly vPipe III Ebony e-Pipe Kit was made by high quality ebony wood, this epipe Kit provides you an amazing feeling in hands with delicate handcraft and flawless surface. Just as its name, the VapeOnly vPipe III Ebony ePipe Kit adopts pipe shape design for more joy in your vape! The VapeOnly vPipe III Ebony e-Pipe body works with a single 18350 battery with max 24W power. The vPipe III Ebony frees your hands with air-activated system, so you will vape it without any button. While the Pipe Atomizer features 1.2ml e-juice capacity with 07ohm BVC coils. Just get this device for an on-the-go vape!

Parameters

Size: 155 x 100 x 45 mm
Voltage: 3.3V - 4.2V
Power: 15W - 24W
Battery: 1x 18350 lithium battery (included)
Tank Capacity: 1.2ml
Coil Resistance: 0.7ohm
Standby Current: 5uA

Materials: Ebony Wood, Glass, Brass, Silicone

Features:

Made of ebony wood and with delicate handcraft
ePipe shape design
Air-activated system
Detachable structure for easy cleaning
LED light indicates working mode

It comes with

• 1x vPipe III Ebony
• 1x Spare Coil
• 1x Spare Glass Tube
• 12x Spare Silicone
• 1x 18350 Li-ion Battery
• 1x Li-ion Charger
• 1x USB Cable
• 1x Holder
• 1x Manual
• 1x Warrenty Card

Feature:

5pc cartomizer is compatible with DSE610C e pipe, each piece contains similar 510 threading and diameter as usually cartomizer does. It can be useable with most eGo 510 batteries.

Need to fill e liquid before use as it is not pre filled.

Contents

• 5 x pieces of Cartomizers for DSE610C e pipe

Specifications:

Manufacturer: DSE
Units: 5 pieces pack
Weight: 42 grams shipping weight
Tube Size: Diameter is 9.2mm and Length is 40mm
Color: Polished silver
Volume: 0.9ml for 200-300 mouthfuls
Resistance Capacity: 2.1 to 2.4 Ohm
Package: Simple

Get started quickly

How to fill cartomizers?

Each cartomizer have 0.1 ml juice capacity, recommended no more fill than 0.9 ml to save wasting.

To refill liquid into cartomizer it is suggested to use juice injector for save wasting e juice..

To avoid wasting by dripping out liquid inject it slowly into cartomizer with e juice injector.

This clearomizer is designed for E-pipe 618 with a large liquid capacity also it consists of dual coil. This clearomizer can hold 2.5ml liquid in clear tank and with help of scale printed on tank you can see the remaining amount of liquid any time. It can produce smooth and beautiful vapor all the time with no burning taste.

Note: you cannot see the remaining liquid amount on other e-pipes

E-pipe 618 bowl is replaceable and designed for e-pipe. The bowl is auto activation device when user put it in E-pipe it will automatically on. The bowl has 5 seconds cut off feature when device is overheated of the atomizer which holds 18350 3.7v 900mAh battery. It has 510 universal thread connection.

PACKAGE CONTENTS: 1*X6-V2 Atomizer, 1*K1000 Mod, 1*Battery Charger, 1*Zipper Case, 2*Kamry 18650 batytery

The Nicolas is a MTL sub ohm tank that focuses on flavor. It features a BVC Coil Structure along with a convenient Plug-Pull mechanism for ergonomic replacement process. The adjustable airflow control valve features 9 different airflow settings for precise airflow adjusted down to your own personal preferences. The kit includes a 1.8 ohm and a 0.6 ohm coil.

You don’t have to screw the coils hardly any more.
The most special design is the extra air hole in the adjusting ring.
Normal air control hole is big and cannot choose one air flow for preference.
With this extra hole in the ring, people can choose any airflow for different mod and different vapor. It maximizes NICOLAS coils vapor function and produces better flavor with 9 airflow choice!

NICOLAS FEATURES:
1.Unique Plug-Pull coil easy replacement design. 
2.Threaded top cap free from leaking.
3.Pinpoint airflow control system.

Details:
Type: MTL flavor tank.
Material: Stainless steel+pyrex tube.
Resistance: 0.6ohm(18-25w), 1.8ohm(9-13w).
Size: H46*W22mm.
Thread: 510.

Packing list:
1*Nicolas tank (Installed 0.6ohm coil )
1*Nicolas coil (1.8ohm)
1*Replacement glass tube
1*User manual
Spare parts

Aspire Revvo Sub Ohm Tank is a 24mm, threaded top fill tank with an innovative spring loaded fill system and the new horizontal orientated ARC (Aspire Radial Coil) coil head. A single spring loaded fill port is used to fill the tank, which is capable of holding up to 3.6ml of E-liquid. The Revvo Sub-Ohm Tank utilizes the ARC Coil Family that features a unique stove top style coil system, capable of running 50 to 100W but recommended to be used at 80 to 85W. Airflow enters the Revvo Sub-Ohm Tank via triple top adjustable airflow, measuring at 10.5mm by 2.5mm each airslot and can be fully closed. A 12mm wide bore drip tip acts as the drip cap for the Revvo. With the new ARC coil head and a spring loaded fill port, Aspire's Revvo is a must have for flavor and cloud chasers alike.


Aspire Revvo Sub-Ohm Tank Specs:

• 24mm Diameter
• Stainless Steel Protective Glass Sleeve
• Threaded Top Fill
  • Single Spring Loaded Fill Port
  • 3.6ml Tank Capacity
• Triple Top Adjustable Airflow
  • 10.5mm by 2.5mm Each Airslot
  • Fully Closeable
• ARC (Aspire Radial Coil) Coil Family
  • Horizontal Orientation
  • 0.10 to 0.16 ohm
  • 50 to 100W
    • 80 to 85W Recommended
  • Kanthal AF Wire
  • Organic Cotton
• Drip Tip Acts as Drip Cap
  • 12mm Wide Bore
• Stainless Steel and Glass Construction

​
Product Includes:

• One Aspire Revvo Sub-Ohm Tank
  
  • Two ARC 0.10 to 0.16 ohm Replacement Coils
• Protective Silicone Cap
• Spare Glass Section
• Spare Parts Pack
• User Manual
• Warning Card

Vaporess NRG Sub-Ohm Tank, is a 26.5mm, slide to fill top fill system, capable of holding up to 5ml of your favorite E-Liquid. The NRG Sub-Ohm Tank utilizes the GT Coil Family and includes a 0.15 ohm GT 4 head and a 0.15 ohm GT 8 coil head. The GT 4 coil head is a vertical dual coil, rater for 30 to 70W while the GT 8 coil head is a quadruple vertical coil, rated for 50 to 110W. Airflow enters the NRG Sub-Ohm Tank via dual adjustable bottom airflow that is fully closeable and has an extra heating insulation layer. A unique 14mm bore delrin mesh drip tip that prevents spit back and a 510 drip tip adapter is included with the tank. With its large tank capacity and ease of use, the Vaporesso NRG Sub-Ohm Tank goes "above and beyond" the other sub-ohm tanks on the market.

Product Features

• 26.5mm Diameter
• Slide To Fill Top Fill Design
  • Large Fill Ports 
  • 5ml Maximum Capacity
• GT Coil Family
  • GT 4
    • 0.15 ohm
    • Dual Vertical Coil
    • 30 to 70W
    • 45 to 65 Recommended Range
  • GT 8
    • 0.15 ohm 
    • Quadruple Vertical Coil 
    • 50 to 110W 
    • 60 to 80W Recommended Range
  • Organic Cotton
• Dual Adjustable Bottom Airflow
  • 13mm by 2.5mm Each Airslot
  • Fully Closeable
• Proprietary 14mm Bore Delrin Mesh Drip Tip
  • Prevents Spit Back
• Heating Insulation Layer
• 510 Drip Tip Adapter

Product Includes

• One Vaporesso NRG Sub-Ohm Tank
• One 0.15 ohm GT 4 Coil
• One 0.15 ohm GT 8 Coil
• Proprietary 14mm Bore Delrin Mesh Drip Tip
• 510 Drip Tip Adapter
• Spare Glass and O-Rings
• User Manual

Innokin Ares MTL RTA BY PHIL BUSARDO AND DIMITRIS AGARAFIOTIS,features a two post single terminal build deck, a smoked glass tank section, and a convenient push to open top fill design. The Ares RTA'S ability to produce immense flavor and vapor production stems from its core, a rounded bell chamber for an easy fill, smooth flavor, and reduced air turbulence. The air port diffuser distributes the air evenly through the coils ensuring the air travels to the top of the bell through the reduced chimney design for the perfect flavor and throat hit. The Ares comes as a 4ml compact tank system which can be switched out for a smoked glass section. Juice enters the Ares through a push to open top fill for convenience and ease of use. The Ares utilizes either a wide bore drip tip or a narrowed bore drip tip. Beautifully constructed, precision machined, and packing in the most intuitive and effective airflow systems across any atomizer today, Innokin's Ares MTL RTA enters the market as a strong mouth-to-lung RTA that boasts great flavor and convenience.

Product Features:

• 24mm
• Push to Fill System
  • 4ml E-Juice Capacity
• Two Post, Single Terminal Build Deck
  • Side Mounted Screws
  • Dual Wicking Ports
  • PEEK Insulated Positive Post
  • Single Internal Air Tube on Build Deck
    • 9 Seperate Airflow holes
• Rounded Bell Chamber
  • Reduces Air Turbulence
• Adjustable Bottom Airslots
  • Four Different Airflow Holes
    • 2mm
    • 1.5mm
    • 1mm
    • 0.5mm
  • Can Be Adjusted to be Fully Open
  • Can Be Adjusted to be Single
• 5mm bore Delrin Drip Tip
• Gold Plated 510 Pin

Product Includes:

• One Innokin Ares RTA
• One 3ml Glass Section
• One Smoked Tank Section
• Drip Tip Set
• One Hex Key
• One 1M of Wire
• Two Pre-built Coils
• Spare Part Pack
• User Manual

The Augvape Skynet Sub Ohm tank features a large 5.1ml e-Liquid capacity using the included bulb glass tank. The Skynet features a top fill design with a twist off cap that allows for easy and convenient refills. The Skynet features triple airflow slots that may be adjusted using the bottom airflow control valve. The Skynet utilizes Skynet mesh coil 0.15ohm atomizer heads designed for performance and longevity. The Skynet is topped off with a beautiful 810 wide bore frosted drip tip.

Product Features:

• 24mm Diameter
• 3.6ml Max Juice Capacity
  • 5.1ml Pyrex Tube Included
• Threaded Top Cap Fill System
  • Dual Fill Port
• Augvape Skynet Coil Family
  • 0.15 ohm Coil Head
    • Mesh Coil
    • 60 to 80W
    • Organic Cotton
• Dual Adjustable Bottom Airflow
  • 10mm by 2mm Per Air Slot
• 9mm Bore 810 Drip Tip
• Stainless Steel and Glass Construction

Product Dimensions:

• 24mm by 44mm

Product Includes:

• One Augvape Skynet Sub-Ohm Tank
• One Standard Glass Tank Section
• One Mesh 0.15 ohm Coil Head
• One Spare Parts Bag

Introducing the innovative Joyetech NCFilm heater along with the CUBIS Max tank. Being a coil-less design, this NCFilm heater can be easily cleaned thus supports a long lifespan. The CUBIS Max atomizer allows a simple replacement of cotton for a pure and delicate vaping experience. Having the top-fill and top-airflow system, you’re free of any leakage. Best at 40w, you can enjoy a huge but flavored clouds.

• 5ml juice capacity
• Glass tank
• Heater: Joyetech NCFilm heater (Kanthal 0.25ohm)
• Coil-less design, innovative NCFilm heater: Introducing the innovative Joyetech NCFilm heater, made of Kanthal,takes a horizontal building way in order to achieve great vaping experience.
• Huge clouds and optimal flavor: The NCFilm heater has a larger heating area which contributes greatly to the vapor production and the flavor.
• Long life span: The NCFilm heater can be cleaned with cloth when flavor drops and re-use again. Thus it supports 3 months or more lifespan according to our experimental tests1.
• Filling with ease: The CUBIS Max atomizer adopts the push-to-open top filling design. Simply push the top cap to reveal the filling hole. Then you're free to go.
• Top airflow, avoid any leaks: The CUBIS Max atomizer adopts top filling and top airflow system, avoiding any leaks.
• 510 threading connection
• 28mm overall diameter
• 25mm inner diameter

UWELL Fancier RTA & RDA is one of the most innovative and creative products released up to date. It is better known as an RDA that goes with a complete and unique performance. It also can hold within an ample amount of e- juice which efficiently meets the users’ daily requirements. The amount of e-liquid it can hold within is 4ml. To make this an RDA, you just have to go through a simple process and that includes the switching the glass of the top cap and then that’s it. It is also very easy to switch the system back and forth without any sort of hassle.

If you actually want to see your build, you might always prefer the RTA mode. Due to its downward wicking, you always want to see that how your cotton is wicking inside. The juice easily suits in above the post and the system is fed downwards.

• 1  Fancier Atomizer
• 1 Extra  Glass
• 1 Stainless Steel RDA Top Cap
• NiChrome Wire(0.8Ω)
• 4 x Extra Screws
• 1 x Wrench
• 1 x Pack of Replacement O-rings
• User Manual
• 1 x Organic Japanese Cotton

​

The Solomon 2 Tank from KAEES is a 5ml RTA atomizer. This innovative single coil RTA comes with this leakproof and top adjustable airflow control which ensures no-leaking issues. This Solomon 2 RTA is also a top filling tank which is made of high quality 304 stainless steel. 3.5ml/5ml capacity to suit different needs.

Height: 46mm
Outside Diameter: 24mm
Capacity: 5ml (3.5ml extra glass tube included)
Type: Single coil RTA
Drip tip: 810 (510 dirp tip included)
Material: Food grade 304 steel
Thread: 510 thread

Innovative single coil RTA with leakproof design
Top adjustable airflow control, no leaking
3.5ml/5ml Capacity with different tubes
24K Gold plated deck platform, super conductivity
High quality 304 Stainless Steel construction, more environmental
Convenient top filling system
810 Drip tip & 510 drip tip available

It comes with

• 1 x Solomon 2 RTA
• 1 x Spare Glass Tube 3.5ml
• 1 x Clapton coil
• 1 x 510 Derlin Tip
• 1 x 510 Drip Tip Adapter
• 1 x 810 Drip Tip
• 1 x Screwdriver
• 1 x User Manual
• 1 x Spare Parts

CAPTAIN RTA is a very personalized RTA atomizer, with a similar nice appearance of the Captain subohm tank, characterized by a diameter of 25mm and a capacity of 3.8ml, innovative postless deck design. Due to the lack of posts frees up build space to accommodate a wide range of coil structures and complex configurations. The quick sliding top fill design makes filling easier, plus by juice flow control, feel full of pleasure with airflow and cloud vapor. What’s more, the silicon gasket of fill part can be replaced which increases of service life.

Parameter

Capacity 3.8ml
Ultem wide bore drip tip
510 drip tip adapter
Sliding top fill
Replaceable silicon filling part
Cloud chaser and the best flavor
Juice flow control
Gold Plated postless building deck
510 threading connection
25mm overall diameter

It comes with

• 1 Captain RTA
• 1 screwdriver 
• 1 extra glass
• 1 tool pack (O-rings, screws, coils, Japanese Organic Cotton)
• 1 510 adaptor
• 1 Warranty Card

Vapefly Core RTA is designed by German 103 Team. It features powerful "Q" airflow system which can provide you best flavor and Anti-heat design. Core RTA can supports single coil and dual coils. The e-juice capacity is 4ml. If you want a big cloud Atomizer, just take core home.

Features:
Powerful "Q" airflow system
Anti-heat design
Support single coil and dual coils

Capacity: 4ml(2ml)

Packages:
1* Vapefly Core RTA
1* Spare glass tube
Spare parts

Blitz Ghoul BF RDA is the name of an innovation designed and crafted by Blitz Enterprises. It surely is an exquisite product and never fails to grab an attention for the viewers and the customers who ever are looking at the beautiful sight of the product. The diameter of the product is 22mm which makes it quite reasonable and handy to move from one place to another. It features a unique single-post build deck with clamp style mechanism. A rebuildable dripper is also present in its system for the effective functioning of the product. To regulate the airflow within the product, concentrated system has been embedded in it. It also contains a variety of drip tips for the smooth functioning of the system. Supporting all these exclusive features, you will also find a squonk ready 510 BF pin. To cater to a flavor orientated single coil builds, it integrates a single-post and a dual terminal design. For easy set-ups, coil heads have been inserted with two terminal shelves and a top-secured using some slotted screws. Ceramic built clamp unit is present which delivers a heat-resistant securement. This has been done to maintain a strong conductivity. The airflow has been maintained using a proper channel and it enters the structure through a single slotted airflow. For excellent cooling properties, a concentrated direct-to-coil air path has been maintained. Along with the squonk ready BF 510 pin, a set of 810 Snake Resin drip tip with an acrylic drip tip is also present.

Blitz Ghoul BF 22mm RDA Features:

• 22mm Diameter
• Deep Juice Well 
• Superior Stainless Steel Construction
• Unique Single-Post, Dual Terminal Design 
• Clamp-Style Mechanism - Top-Secured via Slotted Screws
• Heat-Resistant Ceramic Clamp
• Single Coil Configuration
• PEEK Insulators
• Double O-Rings Secured
• Side Adjustable Airflow Control - Single Slotted
• 810 Snake Resin Widebore Drip Tip 
• 810 Acrylin Widebore Drip Tip 
• 510 Drip Tip Adapter
• Gold-Plated BF Bottom Feeding 510 Pin
• Gold-Plated 510 Connection

Includes:

• 1 Ghoul BF RDA
• 1 810 Snake Resin Drip Tip
• 1 810 Acrylic Drip Tip
• 1 510 Drip Tip Adapter
• 1 510 BF Squonk-Ready Pin
• 1 Accessory Bag

Vandy Vape Icon RDA is another successful product of the Vandy Vape and very renowned vape reviewer Mike Vapes. The best thing about this product is its build deck which is totally broadened enough providing ample space and quite versatility to the vibrant atomizer platform. Apart from this feature it offers, many other squonk ready accessories are present. To provide a good support to this already built structure, an adequate airflow system has been impelled with it. The product diameter is 24mm and along with this unique design, a beautiful exterior design has been precisely engraved and fitted in throughout the chassis system. To endure better performance and stability, the whole system has been plated with 24k gold. As an arrangement set of the product, the build deck has been set into sub divisions and other functional procedures. It has been divided into further two posts with a dual shared terminal per post. For larger coil leads, enough space has been provided as the dimensions totally state 3mm by 2mm wide openings. For added durability and heat resistance, 7mm juice well has been featured in the system of this product. Overall, to create an effective airflow management system in the product, the airflow enters through the 3mm x 4mm openings that feature the aligned sides into the vapour to adjust all the airflow of the system. The latest 810 drip tip has been used in the system as high performance atomizers along with an elegant trio of delrin drip tips. All of three vary differently i.e. in height, width and bore. Along with all these add ons, a 510 drip tip adapter is also included with the squonk ready 510 pin. Overall it is a good combination of function, aesthetics and form. At a highly competitive price, it is a very good product for squonk users.

Product Features:

• Overall Diameter: 24mm
• Cumulative build deck: Two Post Shared Terminal
  • Per post Shared Dual Terminal
    • Dimensions: 3mm x 2mm each
    • Top Mounted Grub Screws
    • Wide Lead Space
  • PEEK Insulator
  • 7mm Deep Juice Well
  • Overall Gold Plated Build Deck
• Angled Side Airflow
  • 3mmx4mm Each
    • Per side: Two Openings
  • Beveled Sides
    • Slopes Airflow Into Chamber
  • Single Airflow Option
  • Top cap supported Airflow Control
• 510 contact overall 24K Gold Plated
• Squonk 510 Contact
• 304 Stainless Steel
• 810 Drip Tip
  • 9.5mm Bore Delrin Drip Tip
    • 13mm Outer Diameter
  • 11mm Bore Delrin Drip Tip
    • 16.5mm Outer Diameter
  • 10mm Bore Delrin Drip Tip
    • 18mm Outer Diameter
• 510 Drip Tip Adapter
• CNC Engraving

Product Includes:

• One Vandy Vape iCon RDA
• Drip Tip Set
• One Hex Key
• One Squonk Pin
• Spare Part Pack
• User Manual

ADVKEN Gorge RDA

• 304 stainless steel construction
• Removable PEI wide bore drip tip
• Dual-bevel side airflow system
• Deep juice well
• Unique large build deck for simple coil building
• Bottom refilling design
• 510 threading connection
• 24mm overall diameter

PACKAGE CONTENTS

1 x RDA Atomizer
1 x Spare PEI Top Cap
3 x O-rings
5 x Screws

Pure Organic Cotton made in Japan.
Due to its best flavor and wicking ability it is known as Japanese Koh Gen Do Cotton
Pure 100 percent Organic cotton not go through any factory/ chemical process, washed or pigmented.
Darker flecks in this Cotton are pure and must be predictable.

Vapefly Galaxies MTL RDA is considered as one of the devices which has a much systemized airflow throughout its process and system and this is the reason it is admired by the users. It features a precise 6 level side airflow system to keep the system intact and it also has a unique limitless assistant screw. This is used to adjust the airflow system as per the user’s requirement to obtain the MTL vaping. The leakage problem has been solved with the help of side and oblique airflow. In order to remove the atomizer from mod, a limit slot design in the cap has been added. To reduce the heat problem, PMMA/Delrin material has been added inside. The best and the far most unique thing about this product is that it comes with a BF pin. It can thereby match up any squonk mod in the market. If you are looking for best vape and top flavor, then the Vapefly Galaxies MTL RDA is the perfect choice for you.


Main Feature:
1. Precise 6 level side airflow system
2. Unique limitless assistant screw airflow controling
3. Side&oblique airflow makes great flavor with no leaking
4. Limit slot design makes easy to remove atomizer from mod
5. PMMA/Delrin material for anti-heat

6. Easy single coil building deck with BF pin

Packing List:

​

Innokin Z-Plex3D Mesh Coil adopts next generation 3D mesh coil technology. It features 0.48ohm resistance. This advanced coil increased warmth, coil life and flavor. This coil is good for the medium and high power settings. It is compatible with Zlide Tank. Zenith Tank and Z-Biip Pod Kit,5pcs in a pack.

Uwell Crown 3 Replacement Coils is specially designed for the latest Uwell Crown 3 Tank for the perfect balance of vapor and flavor production. The coils has convenient structure with pull-plug mechanism for easy and quick replacement process.

Uwell Crown III replacement coils with 0.25 ohm features 80-90 wattage while the 0.5 ohm coils are rated for 70-80 watts. the 0.4 ohm Coil are rated for 55 to 65W .

• Each pack consists of 4 coils
• Coils with 0.4 ohm resistance
  • Vertical Parallel Coil Kanthal 
  • 55 to 65W Organic Cotton
• Coils with 0.25 ohm resistance
  • Parallel coil made of 316 stainless steel
  • Variable wattage from 80-90 watts
• Coils with 0.5 ohm resistance
  • Parallel coil made of 316 stainless steel
  • Variable wattage from 70-80 watts
  • 

Uwell Caliburn Replacement Pods are a set of food-grade plastic pods featuring a 2.0mL refillable pod, 1.4ohm Pod Coil Resistance, and possesses a top fill system, stoppered by the top cap drip tip mouthpiece. 

Uwell CALIBURN Replacement Pods Features:

• 2mL Capacity Juice Pods
• Pod Coil Resistance: 1.4ohm
• Food Grade Plastic Pod Construction
• Dual Port Top Fill System - Top Cap Drip Tip

The Horizon Arco Replacement Coils are replacement coils designed for the Horizon Arco Sub-Ohm Tank and produce maximum flavor and vapor production. Each pack of coils comes with three replacement atomizers with vertically oriented coils that utilize organic cotton and a flax paper liquid guiding system.


Coil Specifications:

• Horizon Arco Coil Family
  • A4 Coil
    • 0.2 ohm
    • Parallel Quadruple Coil
    • 70 to 80W
  • A6 Coil
    • 0.2 ohm
    • Triple Vertical Coil
    • 80 to 90W
  • Organic Cotton and Flax Paper Liquid Guiding System

VapeFly Fantasy Coil Head is designed for Fantasy tank. There are F12 duodenary coil head (0.12ohm, 130-200W), F2 quadruple coil head(0.15ohm, 90-160W) and F6 sextuple coil head(0.15ohm, 100-140W) for your selection. The 3 low resistance coils bring different vaping experience to meet your different needs. F12 and F2 produce heavy smoke instantly, while F6 produces more smooth airflow and intense flavor. Get them as spare parts for your Vapefly Fantasy tank. Besides, F12 and F2 coils are also compatible with SMOK TFV12 tank; F6 coil is also compatible with Aspire CLEITO 120 tank.

Relx Alpha Replacement Pod(2-Pack)

Note:This pod only can be used in the Relx Alpah kit.

Here is the newest Cold Steel 200 Box Mod,in co-operation between the well-known hardware manufacturer Ehpro and the Youtuber Manuel Topschall alias Nebelfee, the Cold Steel 200 battery carrier was created. Designed for use with two 18650 rechargeable battery cells (not included), the Mod not only impresses with its appearance, but also the materials used, as well as its feel and inner values. 

The Cold Steel battery carrier in every color variation is epitomized from stainless steel and PVD coated (Physical Vapor Deposition - a coating technique in which a substance is vapor deposited on the Matrial to improve the durability and optically adjust).

The positioning of the buttons makes the Cold Steel 200 very easy to operate and offers various setting options without having to go into the system menu. So all keys can be locked ("Mod Lock" - to prevent, for example, an accidental release in the bag) by pressing the (+) and (-) keys together. The power button and (-) pressed together let the display toggle so that both right and left-handed users can conveniently use the mod. Power button and (+) activate the "Key Lock", where the setting buttons (+) and (-) are locked, but the power button still works. Each setting is confirmed on the OLED. 

On the front side below is the button for the battery cover. If this is pressed the battery cover jumps, which simultaneously sets the bottom plate and the battery cells can be easily inserted. The poling direction is indicated on the contacts in the lid. The underside of the bottom plate (battery cover) are rubber plates to protect both the box and the shelf. On the top of the battery carrier is the 510er evaporator connection, on the evaporator with 25 mm diameter flush. All evaporators are supported with a resistance between 0.05 to 3.0 ohms.

Powered by Ehpro's proprietary chipset, the electronics respond very quickly and provide Power (PC - Variable Watt), VOLT (VC - Voltage VAR), Curve, Temperature Control and Bypass output modes.

• Power offers the option of setting 5 - 20 watts in 0.1 watts increments.
• Volts can be set between 0.5 to 8.0 volts.
• Curve mode can be used to set the output power to the second. This is based on the multiple of the main setting. If the battery carrier is set to 40 watts, the setting 1.5 in curvemode results in 60 watts. This allows the battery carrier to be set exactly on the coils.
• The temperature control offers presetting for nickel, stainless steel and titanium wires as well as the TCR mode for free input of the temperature coefficient. Here, the output power (watts) and the maximum temperature to be reached are set.
• The Bypass mode is the unregulated mode in which the full power of the battery cell is applied to the evaporator. If the battery cell is fully charged, it is 4.2 volts and correspondingly less as the battery level drops.

The Cold Steel 200 Mod also offers the PreHeat modes "Soft", "Normal" and "Strong", which affect the first 300 ms of the usage process. With the "Soft" setting, "only" 0.9 times the set output bars are used, while with "Normal", the set output power is taken as normal. With "Strong", the output power increased 1.1 times in the first 300 ms, which allows the coil to heat up faster and thus achieve faster performance.

On the side of the box is the USB-C port, which can be used to update the firmware and recharge the batteries up to 2 amps (we strongly recommend using an external charger to recharge battery cells!).

• Height: 88 mm
• Width: 25 mm
• Depth: 52 mm
• Material: stainless steel, PVD coating
  
  
• Output power: 5 - 200 watts
• Output voltage: 0.5 - 8.0 volts
• Output current: max. 40 amps
• Resistance range: 0.05 - 3.0 Ω
• Modes: Power (VW / PC); Volts (VV / VC); Curve; Temperature control (nickel, stainless steel, titanium); bypass
  
  
• Akkuslots: 2x 18650 (not included - ache on battery capacity!)
• OLED display
• 510er evaporator connection
  
  
• Max. Diameter of the usable evaporator without standing over: 25 mm

The Newest Smok X-Priv Mod features glassy appearance with 2.0-inch massive HD display, bringing smooth touch with excellent texture to you! Powered by dual 18650 batteries, the X-Priv fires up to a maximum output of 225W. The updated user interface provides an easy operation system too. Along with the ergonomic side fire button, multiple protections and an easily-installed battery cover, our X-Priv will never let you down.

Features:

Glassy appearance with smooth surface
Massive 2.0-inch HD screen
225W maximum output with dual 18650
Dual battery indicator
Easy-installed battery cover

Note:we just got first batch Smok X-priv Mod this morning,the Gold and Rainbow color now in stock.we will post all pre-orders asap.thanks for your support!

Here is the World's Smallest dual battery squonk kit  which co-designed by Tony B and Vandy Vape CEO Stefen Z,the Pulse Dual Squonk Mod has maximum power output of 220 watts with Dual 18650 batteries and comes with the the excellent quality and highest stability Vandy Chip,also the Vandy Vape Pulse Dual Mod kit comes with the newest Pulse V2 RDA,there different airflow rings supporting Dual or Single Coil builds.The Pulse V2 RDA adopts an innovative floating deck, which supports top squonk feeding and bottom juice return design. Easy to build and avoid leakge.

Main Features:

1.Smallest Dual Battery Squonk Mod with 75.3mm height &52.99mm width
2.The battery cover and juice bottle are independent. 
3.The Mod and PULSE V2 RDA match perfectly.
4.Ergonomically Designed
5.Powered by an Upgraded Vandy Chip with max power of 220w
6. Convenient battery installation
7.Equipped with 7ml juice bottle

Here is the newest Mfeng UX Mod from Snowwolf, combining a modern design and elegant craftsmanship. This Mod retains the acclaimed SnowWolf Chipset that we all know and love, including a maximum power output of 200W. Included as an added feature is the protection lock, accessible through the menu, and customizable to the desired four digit unique to the user. 

Externally, the SnowWolf MFENG UX features a new and elegant face plate that surrounds the beautiful 1.3 inch TFT screen. This 1.3 inch TFT Screen will visualize essential vaping data such as output mode and atomizer resistance. Absent from the screen however is the battery life indicator, voltage output, making it simplistic to read. Moving onto the side of the device, there lays the firing button, now presents itself as a grip style button which is amazingly comfortable to press. Located on the front panel are dual adjustment buttons used to access the menu (accessible by pressing both adjustment buttons at the same time), navigate through the menu, and adjust working output mode. Behind the face of the device is the acclaimed SnowWolf emblem, elegantly displayed. This panel acts as the magnetic battery door which houses dual high amperage 18650 batteries (sold separately).

Internally, the SnowWolf retains the same chipset as its predecessor, however some updates have rolled out. The minimum wattage output the SnowWolf MFENG UX can go down to 5 watts and up to 200 watts. A lock system has been implemented, allowing users to have a unique code to access their vape device, secure from unwanted attention. A complete temperature control suite is available for use, ranging from Ni200, Titanium, and three types of Stainless Steel support. For user customization, a TCR option is open for those looking for curved settings. All of this options make this chipset and device perfect for any Sub-Ohm Tanks and Rebuildable Atomizers.

PRODUCT SPECIFICATIONS

• SnowWolf Chip Set
  • 5 to 200W Output Wattage
  • 6.4 to 8.4V Input Voltage
  • 0.05 to 3.0 ohm Atomizer Resistance Range
• Temperature Control
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel Support
    • 304
    • 316
    • 317
  • TCR Functionality
    • Temperature Coefficient of Resistivity
  • 200 to 570 Degrees Fahrenheit
• Three Button Control Face
  • Oversized Firing Button
  • Adjustment Buttons
• 1.3 Inch TFT Color Display
  • Switch Between Various Display Arrangements
  • Output Wattage
  • Output Temperature
  • Atomizer Resistance
  • Colored Background
  • Child Lock
• Micro USB Charge and Update Port
• Magnetic Battery Access Door
  • Accepts Two High Amperage Batteries
  • Sold Separately
• Zinc Alloy Construction
• 20mm Stainless Steel 510
  • Spring Loaded Gold Plated 510 Connection
• Burn Protection/ Overcharge Protection/ Low Resistance Protection/ Short Circuit Protection/ Overtime Protection/ No Load Protection/ ESD Circuit Protection/ Low Power

PRODUCT INCLUDES

• One SnowWolf MFENG UX Mod
• One Micro USB Cable
• User Manual and Warranty Card

The Acrohm just released the new Fush Mod Black Edition,this tube mod is an innovative semi-mechanical that features a LED color tube, which can be changed to different color with just a shake. It is safer to use than mechanical mod, and it can reach a firing speed less than 0.01S, and the minimum resistance is 0.07ohm. The mod is powered by single 18650 battery (NOT INCLUDED). It uses stainless steel and bulletproof PC material, together with 6 protections, it is a durable and safe mod for your choice.

• Stainless steel + bulletproof PC + copper construction
• Static current: ≤50μA
• Working voltage: 3.2-4.2V
• Working temperature: -30'C-85'C
• Maximum output current: 40A bypass output
• Resistance range: 0.07-2.5ohm
• Firing speed: ≤0.01s
• A visual revolution, breathe new vape life: illuminate the breathing light while vaping, to express yourself with your own color. Acrohm FUSH is the first semi-mech mod featuring light spreading around the body. Any time or place, FUSH will be the center of attention.
• Innovative technology, change color with a flick: Fush employs new techniques to precisely feel the vibration to change the color of light. Five colors are available for interactive light changing.
• Chip inside: it's safer to use.
  • High temperature protection
  • Short-circuit protection
  • Overload protection
  • Over-time protection
  • Low voltage protection
  • Reverse protection
• All-new design: the super durable bulletproof polycarbonate material (PC) of the tube, hard to be broken. Food-grade 304 stainless steel, burnished to make FUSH more aesthetically match all atomizers including subohm tank (0.07-2.5ohm), RDA, RTA and RDTA.
• High electrical conductivity: copper conducts electricity greatly well, to ensure powerful and stable performance.
• High performance of bypass output, also, excellent heat exchange: FUSH empowers you with the ultimate in battery life, using 18650 battery. Six venting holes going through from top to bottom for heat dissipation and pressure relief.
• Intuitive mechanical switch: simple clicks on the switch button to power on/off, likewise, to turn on/off the lights. No more redundant work.
• Houses single 18650 battery (battery sold separately)
• 510 threading connection

Asmodus introduces the Pumper 18 80W Squonk Box Mod, a light weight bottom feed device with a beautiful stabilized wood finish. The Pumper showcases a small, compact design that is powered by a single 18650 battery(sold separately) and features a UL-80-JX chipset that the device to run up to a maximum of 80W depending on the current state of the battery, and shut off when the battery reaches 3.3V. The Pumper chassis is made out of 304 Stainless Steel but the body is made out of Stabilized Wood. The bottom feed bottle can be accessed by removing the bottom tab and taking the bottle out. The bottom feed bottle of the Pumper is capable of holding a maximum of 8ml of your favorite E-Liquid, making this a great all day vaping device. The Asmodus Pumper 18 80W Squonk Box Mod is the perfect setup for those looking for a visually appealing and easy to use device.


Product Features:

• UL-80-JX Chipset
  • Power Output Based on Current Battery State
  • 80W Maximum Output
  • 27A Output Current
  • 3.3v to 4.2V Output Voltage
  • 0.1 to 3 ohm Atomizer Range
• 304 Stainless Steel Chassis and Stabilized Wood Body
  • Bottom Feed Bottle
    • 8ml Maximum Capacity
    • Magnetized Bottom Feed Door
• Single 18650 Battery Powered
  • Tool-less Battery Door Cover
  • Battery Sold Separately
• Single Button Control Face
  • Oversized Firing Button
• LED Light Indicator
  • LED Will Flash Green When Battery is Installed Correctly
  • LED Will Flash Red Five Times When Battery Life is at 3.3V
  • LED Will Flash Red if the Atomizer is Short
• Reverse Polarity Protection/Under-Voltage Protection/High Resistance Protection/Thermal Protection/Over Voltage Protection/Low Resistance Protection/Short Circuit Protection

Product Includes:

• One Asmodus Pumper 18 80W Squonk Box Mod
• User Manual

Note:we will get first batch around 30th,April.

Sigelei Fuchai Squonk 213 150W Box Mod has very unique characteristics and features as compared to the rest of vape products. To improve the efficiency of the product, it is powered by a single 21700 battery and it can even provide the maximum output which can level itself up to 150 W. Because of its unique system, it is compatible with 18650 and 20700 battery.

Product Specifications:

Each set contain:
1pc Recurve Dual RDA
1pc Coil Trimming Tool
1pc Squonk Pin
1pc User Manual
1bag Coils
1bag Organic Cotton
1bag Extra Screws & Orings

The Vandy Vape Simple EX Squonk Kit follows the tremendous success of the Pulse BF 80W, featuring a compact regulated voltage squonk device and RDA with integrated battery design and user-friendly functionalities for a great entry-level squonk set-up. Featuring one of the smallest squonk BF mod to date, the Simple EX Squonk Kit features a lightweight and compact box mod with a 4mL squeeze bottle cutout and a smart chipset. Powered by the built-in battery, the Simple EX Squonk Box Mod features a OLED screen that clearly displays voltage settings and battery life. Operated by a tactile firing button, the Simple EX Kit implements a variable range of 3.3 to 4.5 Volts, with adjustments made in increments of 0.3V. The included Simple EX RDA measures 19mm in diameter, presenting a top-secured two-post for single coil configuration and a restricted single side airslot design. Perfect for mouth-to-lung vapers or beginners looking into squonk systems, the Vandy Vape Simple EX Squonk Kit is a phenomenal offering.

Vandy Vape Simple EX Squonk Box Mod Features:

• Dimensions - 58.5mm by 41mm by 23.6mm
• Intergrated Battery Design
• Bottom-Feeding Squonk Design - 4mL Squeeze Bottle
• Vandy Vape's Advanced Chipset
• Variable Voltage Range: 3.3-4.5V
• Voltage Changes in Increments of 0.3V
• Lightweight Nylon & ABS Construction
• Intuitive OLED Screen - Battery & Voltage Display
• LED Battery Light Indicator
• Tactile Firing Button
• Dual Adjustment Buttons
• Overtime Protection
• No Atomizer Alert
• Low Power Protection
• Short Circuit Protection
• Over Temperature Protection
• Squonk-Ready 510 Connection 
• Available in Pink, Blue, Green, ULTEM

Vandy Vape Simple EX RDA Features:

• 21mm Diameter
• Clear Acrylic Top Cap Construction
• Optional Delrin Top Cap 
• Two-Post, Single Terminal Design
• Large Terminal Shelf Opening
• Top-Secured via Flathead Slotted Screws
• Restricted Airflow Design
• Adjustable Single Side Airslot - Multi-Sized Airflow Size
• Gold-Plated Squonk BF 510 Pin
• Gold-Plated 510 Connection

Includes:

• 1 Simple EX Squonk Box Mod
• 1 Simple EX RDA
• 2 1.24ohm Superfine MTL Fused Clapton Coils
• 1 Screwdriver
• 1 Allen Key
• 1 Regular 510 Pin
• 1 Spare Parts Bag
• 1 MicroUSB Cable
• 1 Warranty Card
• 1 User Manual